Use Heart do Hardware, Use Sincerity do Business
TERADA HARDWARE
Profession on make, Production to heart
Make structure more firm
Home > Products > RIGGING HARDWARE > Wire Rope Fittings >

US Type 1/8 Wire Rope Thimble Clamp G414 Stainless Steel 316

US Type 1/8 Wire Rope Thimble Clamp G414 Stainless Steel 316
US Type 1/8 Wire Rope Thimble Clamp G414 Stainless Steel 316
US Type 1/8 Wire Rope Thimble Clamp G414 Stainless Steel 316US Type 1/8 Wire Rope Thimble Clamp G414 Stainless Steel 316US Type 1/8 Wire Rope Thimble Clamp G414 Stainless Steel 316US Type 1/8 Wire Rope Thimble Clamp G414 Stainless Steel 316US Type 1/8 Wire Rope Thimble Clamp G414 Stainless Steel 316
CategoriesWire Rope Fittings
AlbumView larger image
BrandTERADA
MaterialMarine Grade 304 or 316, Stainless Steel
ProcessCNC machining,Casting,Stamping,Hot forging
RequirementsGood quality material, high surface, no rust
PackageThickened Woven Bag,Five Ply Cartons, Pallets
ApplicationWire Rope, Tensile Structure, Lifting
Relative HardwareD Shackle, Anchor Shackle, Bow Shackle, Snap Shackle
FOB portQingdao
Terms of PaymentL/C, T/T
Update Time2020-05-30
Detail Information
Rigging hardware
Wire Rope Thimble Description

US Type 1/8 Wire Rope Thimble Clamp G414 Stainless Steel 316 is an American heavy-duty cable thimble. The material is usually made of good marine grade 316 or 304. Because this product itself is very strong, it is usually used for lifting and lifting. The wire rope thimble clamp should be smooth and flat, without any cracks, defects, sharp edges and unequal defects that damage the wire rope. The tip of the wire rope thimble should fit freely and shorten the tip to half the depth of the groove. For the 1/8 wire rope thimble of the hot-dip galvanized table, the surface should be hot-dip galvanized, and the surface should be smooth and smooth, and there should be no defects such as missing plating, zinc particles, bubbles, cracks, etc. There is sufficient adhesion strength. The material of the wire rope thimble can be A3 steel or 15, 35 high-quality carbon steel and stainless steel. how to install a wire rope thimble? For wire rope thimble installation, heavy duty wire rope thimble should be consistent with the specifications of the wire rope, and the diameter of the shaft pin used should not be less than twice the diameter of the wire rope. At the same time, the safety load of duty wire rope thimble should not be less than 32% of the minimum breaking tension of the wire rope.

Thimble is widely used in wire rope link, because it can both protect the cable, cable can also assist in the curve, in use thimble cable to bear some of the force to extend the service life of wire rope, wire rope in many combinations Supporting products are widely used,rigging cable thimble, low cost, but also can be very good to help cable withstand external forces, reduce the efforts of accessories, so that supporting the use of other products more secure.

Terada Hardware rigging cable thimble with high quality stainless steel material to ensure that products in use to better their mission, high-brightness surface treatment, so thimble compared to other materials of similar products, the surface more outstanding for high-end equipment and Aesthetics demanding engineering projects




Material    
                
                                  l Stainless Steel 316 ( AISI316)                        l Stainless Steel 304 ( AISI304)
                           l Carbon Steel 45#                                            l Carbon Steel Q235
Surface Treatment       
                
                                  l Normal Polished                                             l Hand Mirror Polished 
                           l Galvanized                                                     l Paint Spraying 
Process     
                
                                  l CNC Processing                                             l Precision Casting  
                           l Hot Forged                                                     l Stamping
Application
Tensile Structure
Yacht Boat
             Yacht Boat
Production Show
PS: ODM Order and Non-Standard products also could made and designed by Terada Team, Welcome to Contact us.
Please send your message to us
*Email
Tel
*Title
*Content

Agree to use terms of service

KEEP UP TO DATE
Sign up for our newsletter and follow us on social media
subscription
LATEST POSTS